products

Water Resistant Disposable Protective latex Gloves Individual Packing

Basic Information
Place of Origin: china
Brand Name: OEM
Certification: CE / FDA
Model Number: OEM
Minimum Order Quantity: Negotiable
Price: Negotiable
Packaging Details: Single item&50pcs/box
Delivery Time: 3 work days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 200000pcs/day
Detail Information
Properties: Medical Materials & Accessories Product Name:: Surgical Latex Gloves
Material: Medical Grade PVC Length: 260mm-285mm Or Special Requirments
Style: Non-sterile, Powder Free/powdered Size: Small, Middle, Large, X-Large
High Light:

disposable surgical gloves

,

disposable sterile gloves


Product Description

Cheapest Factory Prices Disposable Nitrile,latex, vinyl Surgical Gloves in China

 

 

The requirements for medical-grade gloves are as follows
1:length

Measure with a ruler in mm, and align the glove naturally perpendicular from the edge of the glove to the zero degree of the

ruler, perpendicular to the middle finger tip of the glove.

 

 

 

2: thickness

Cuff: measure the upper lip of the roll 13+3mm at any of three different positions, take the average
Fingertip: cut from the middle fingertip down 13+3mm into four equal parts, and take the average of four parts.
Finger seam: cut the finger seam between middle finger and index finger, measure the thickest part on both sides and record the
maximum value.
3 The leftover side slices are required to be placed in the center of the glove at a distance of 1cm from the edge of the windle,
and the width of the parallel part of the cutter center is 6mm. When the tension is made, the upper and lower clamps are set at a
distance of 40mm, and the test position is the center and 1cm above and below, and the average value is taken.
4:Hanging water test The water requirement is 1000+50ML, the height of gloves is 40mm, the hoisting time is 3 minutes, and the water temperature is
required to be 15-30°
5:Visual Inspecting Test Hole/scratch/tear/drop of oil/mixed number/bad side/insect/hair/serious deformation = unqualified product, not available for sale.
6:Physical test frequency Normally, the weight/length is measured once per hour, the thickness is measured once for 4 hours, and the tension/elongation is
measured once for 2 hours.
7:Standard for grade pinhole testing Each time each line each side sampling 75, 0-1 pinholes for Best quality grade. Main requirements: test all gloves on the production
line, test and wear them every 2-3 hours, no less than 10 minutes each time, and make relevant records.

 

Water Resistant Disposable Protective latex Gloves Individual Packing 0

Contact Details
Michael Shao

Phone Number : 0086-13963523285

WhatsApp : +008613963523285